Re: Recording from Genie DVR
I think the GenieGo and a laptop or iPad with a HDMI connection would be the easy way to go. The GenieGO would work even when the system was inactive and wouldn't need a dish update. The nice thing...
View ArticleRe: can someone help with opening ports on a uverse motorola router
Thank you so much for the info! I now have access to On Demand!!!
View ArticleClik here to view.
Re: Manually Move and updating Channels
ok below is how I guess I'll do this, 1 my friend will do the hardware install at my new place its about 50 miles north from my old place. So when he hooks it up he will make sure signals are great...
View ArticleRe: stoping receiver from going into sleep mode
The screen saver should only come on if you pause a program on a DVR, try resetting the receiver with the red button behind the access card door on most DVRs. Please post the model number(s) of your...
View ArticleRe: no ssid broadcast - no hr44 connection
i'm happy to report that dtv finally fixed this problem.
View ArticleRe: GenieGo OOH Issue with Westell Modem and WRT54GS
Was able to get the OOH working correctly after having the port forwarding configured for ports 8082 and 8083 on both the modem and the wireless router. The service has worked fine since.
View ArticleRe: Unable to record show on a channel I pay for
I'm a bit confused .... are you trying to record from the regular ID channel, or from its "OnDemand" channel? Obviously without an internet connection you can't download (record) the OnDemand stuff....
View ArticlePandora problem - Genie HD DVR HR44-700 & Genie Mini C31-700
I use Pandora a lot on our main Genie HD DVR HR44-700. But with the TV on the Genie Mini C31-700 it will play only part of a song and then the screen goes into sleep mode and shortly after that the...
View ArticleRe: HR44 freezing and breakup
the tech arrived this a.m. (was scheduled for afternoon). he verified low signal on the 103 sat. he also didn't like the way the dish was mounted. here's what he did:* added a bracket to the mount*...
View ArticleRe: Pandora problem - Genie HD DVR HR44-700 & Genie Mini C31-700
Is the HR44 connected to the internet using the built in WiFi if so try connecting an Ethernet cable to the HR44 and a net switch or directly to the gateway/router.
View ArticleRe: Unable to record show on a channel I pay for
I reset my DVR, but now Dark Minds & Secret Lives of Stepford Wives doesn't show up at all in Smart Search. Tried remote booking as well but the error message said failed because program is no...
View ArticleClik here to view.
Re: can someone help with opening ports on a uverse motorola router
Try checking one more thing. When you go to the spot where you choose the direct tv stb1 there is an stb2 And an stb3. Try one of those and see if your devise is there. Sent from my iPhone
View ArticleRe: Source flashing when changing channels
Try swapping this "bad" Receiver with one of your good Receivers. If the problem stays with the "bad" Receiver, you can be pretty sure it's defective. If the problem stays in its room, then...
View ArticleRe: RC71 turning off Marantz AV processor
If you want a remote to turn off all three devices at the same time, you might have to look into a more advanced universal remote. Harmony Logitech comes to mind
View ArticleRe: Questions about upgrading to Genie / saving already recorded DVR material
it works the same with the Genie minis, you need to STOP in order to insert a bookmark
View ArticleRe: Questions about upgrading to Genie / saving already recorded DVR material
He wanted to pause not stop. I have seen that the receiver will resume a program at the same spot after switching to another one of my receivers.
View ArticleRe: Intermittent sound problems.
Sounds like an "HDMI handshake" issue with that HDTV. You can rule out a Genie problem by swapping this "bad" Genie Client with one of the "good" ones. One work around would be to use Component...
View ArticleRe: HR44/700 and Uverse Motorola NVG510 issues usin VOD
That's BS, dad22. Try dcd's tip.
View Article