771-Signal Loss on Satellite In 2
I got this message on my HR24/200 DVD receiver and called for help. After checking several things the tech determined that the B Band Converter Module was bad. The tech had me remove the cable from Sat...
View ArticleClik here to view.
Re: Error 22 and wifi SSID prompt
I don't see where you say that the coax connects to the hr 22.
View ArticleRe: Error 22 and wifi SSID prompt
from my post above"then a coax jumper goes from the HR22 DECA to the CCK-W "towards receiver" port"
View ArticleRC71 with new receiver
I recently had to replace my Genie receiver due to a lightning storm. I sent off an HR44-700 and received an HR44-500, which I understand to be exactly the same except for the manufacturer. When I...
View ArticleRe: RC71 with new receiver
The remote needs to be in RF mode before it can be program to a TV using the HR44 try pressing and holding MUTE and ENTER for a few seconds to set the remote to RF
View ArticleRe: RC71 with new receiver
Oh my gosh, thank you! I went through the "IR/RF Setup" procedure from the menu SO many times, when all along it would do it automatically by starting with a different button combination! So easy!
View ArticleRe: need to stop email
cannot find Preferences under user name. From: shannon01 Sent: Thursday, July 10, 2014 3:17 PMTo: Tim Roche Subject: Re: - need to stop email DIRECTV Technical Forums need...
View ArticleRe: DVR slow to respond
use smart search and search CLEARMYBOX. this worked for me. From: bobbyg47 Sent: Thursday, July 10, 2014 1:13 PMTo: Tim Roche Subject: Re: - DVR slow to respond DIRECTV Technical Forums...
View Articlecan I connect my cinema connection kit directly to my router (wired) or do I...
Can I connect my connection kit directly to my router instead of connecting wirelessly?
View ArticleRe: need to stop email
What software are you using to view this forum? With a Web browser, you simply click on your user name in the upper right side of the forum display window and you'll get a pull down menu. One of the...
View ArticleClik here to view.
Re: can I connect my cinema connection kit directly to my router (wired) or...
If you have the wired DECA BB (black or white with a short coax whip and a coax connecter and an Ethernet port and its power supply then yes you can connect it with an Ethernet cable to the router then...
View ArticleGenie wanting to change channels to start recording
Hello, I'm not sure if this is the right forum to ask about this so if it's not, sorry. We have the Genie and two Mini's hooked up. Recently the main Genie wants to change channels just to start...
View ArticleRe: How do I remove an HD H21/200 receiver from Whole Home network?
If you remove the DECA you will need a BSF. Leave the DECA in place but just remove the ethernet cable from the DECA and receiver
View ArticleRe: Error 22 and wifi SSID prompt
lwheeler wrote: Ok thanks for the explanation.I'm not sure where to go from here. I have posted the instructions on how the CCK should be connected, but it seems you are ignoring them.
View ArticleRe: Error 22 and wifi SSID prompt
I'm not sure where to go from here. Might be easiest to call for a service visit.
View ArticleRe: Error 22 and wifi SSID prompt
Check/Try to do the following again:SWM coax splitter--->Coax Cable--->CCK-WCCK-W--->Coax Cable--->DECADECA--->Coax Cable--->HR22 (Satellite IN)DECA--->RJ-45 Ethernet...
View ArticleRe: Genie wanting to change channels to start recording
First thing to try is resetting your Genie using the red button behind the front access card door.
View ArticleRe: To record and watch another channel at the same time?
Yeah, they'll fix it for you. Keep us posted.
View Article