Quantcast
Channel: DIRECTV Technical Forums: Message List
Viewing all articles
Browse latest Browse all 6332

Re: How do I connect a Mitsubishi Diamond VS45605 rear projection tv to my Genie HR44-500 ?

$
0
0

Ok litzdog911... using your info I made some changes. Since I needed to see the screen to reset the resolution I went to my older HR21-200 box, reset it to 480i and 4:3 ratio, and moved it to the Mitsubishi, connected the component Video cables and the red/white RCA audio cables. Also set the TV to channel 3.

 

I moved the Genie HR44-500 to the other room along with the Sony TV it was originally set up with.

 

  I now have the DirecTV menus visible on both TV's but have the 775 Error code on BOTH TV'S !!  "Receiver can't communicate with the dish".  So now 2 of our 3 TV's are down.  The third is working fine.  I unplugged the SWiM's and reconnected as suggested on the error message, and the connectors are tight... did that several times, even "reset" the HR 21-200 box.  No difference.

 

Does moving these whole house boxes usually scramble signals? Should I ask DirecTV to re-authorize my boxes?

Thank you for your help,  I really don't want to have to strangle my kid...


Viewing all articles
Browse latest Browse all 6332

Trending Articles