what equipment do I need to connect the HR 44-700?
do I need to use the switch are we connected to the wire?
View ArticleClik here to view.
Re: what equipment do I need to connect the HR 44-700?
The HR44 can connect to the internet in three ways 1. wireless with the built in WiFi 2. with the wired DTV provided DECA that uses a coax to your router 3. an Ethernet cable from your router to the...
View ArticleRe: Encore westerns ch 538
First thing to try is resetting your DVR/Receiver using the red button behind the front panel access card door. See if that helps. ( on side panel on H25 receivers
View ArticlePicture is at a slight angle
After a storm when my father in law's directv reception went out - when it came back, the picture on the television is at a slight angle. He says the screen told him something was off by 5 degrees, but...
View ArticleRe: Picture is at a slight angle
First thing to try is resetting your DVR/Receiver using the red button behind the front panel access card door. See if that helps. ( on side panel on H25 receivers
View ArticleRe: Encore westerns ch 538
Good Evening, I have reset the receiver and the problem continues, This is the 2nd. box that I have had this happen with. Greg
View ArticleRe: Picture is at a slight angle
Thanks - we're giving that a try, but even the words on the screen look crooked. It doesn't appear that will help.
View ArticleHow do I connect a Mitsubishi Diamond VS45605 rear projection tv to my Genie...
My son just bought a 1999 model MItsubishi Diamond 1080i VS45605 TV. I'm trying to connect it to our Genie HR44-500, but must be doing something wrong. I downloaded a manual for the TV, but it's so...
View ArticleRe: How do I connect a Mitsubishi Diamond VS45605 rear projection tv to my...
You're on the right track. You want to use the Component Video cables for video and the red/white RCA cables for audio. But you'll need to set up the HR44's Video Setup Menu to only output video...
View ArticleRe: Picture is at a slight angle
Sounds like something got messed up with your TV. Do you have other video sources connected to that TV, like a Bluray or DVD player? Does that also show "tilted" video?
View ArticleRe: Encore westerns ch 538
The H21 is not a DVR. Could the model number be HR21? Has this happened with just one recording? Or lots of times?
View ArticleClik here to view.
What's the difference between Gateway from Cisco Routers?
Recently many network users ask this question. Then i will give the answer to why is Gateway different in Cisco Routers . Wish it can help you.Cisco Routers Price, Compare Cisco Router Data SheetA...
View ArticleRe: Troubleshoot Error message
Thank you all. I discovered that I was indeed on a Test channel, and merely had to switch channels. I have no idea how it happened. I was on the channel when I turned on my television.
View ArticleRe: How do I connect a Mitsubishi Diamond VS45605 rear projection tv to my...
Ok litzdog911... using your info I made some changes. Since I needed to see the screen to reset the resolution I went to my older HR21-200 box, reset it to 480i and 4:3 ratio, and moved it to the...
View ArticleRe: How do I connect a Mitsubishi Diamond VS45605 rear projection tv to my...
Leave the SWM power inserter where it was originally installed by the tech
View ArticleRe: How do I connect a Mitsubishi Diamond VS45605 rear projection tv to my...
This problem is because you moved the SWM power inserter, it has to be on a coax that connects to the red power passing port on your splitter and I suspect you moved it along with the HR44. As peds...
View ArticleCaller ID stopped working on HR34, still works on older receiver.
I have 2 dvr receivers that have been working fine in a connected network. The newer receiver, an HR334/700, used to display caller ID but stopped doing so after 7/1/2014. Caller ID is still working on...
View ArticleRe: Caller ID stopped working on HR34, still works on older receiver.
connect a phone instead of the HR34, do you get a dial tone?
View ArticleRe: Cannot find the & symbol using the remote
If there's no "&" symbol listed, your best bet would be to change your network password to something with no symbols.
View ArticleRe: How do I connect a Mitsubishi Diamond VS45605 rear projection tv to my...
Your correct.. I called tech support and he walked me through putting the SWM back where it should be, got all 3 tv's working again... then I ran a system test on the Mitsubishi ... it failed and now...
View Article