Re: How do you connect a HR24-100C-R to and digital antenna? What kind of...
The AM21 uses a DTV data base to find your local channels and some sub channels will not be there as DTV stopped adding new channels sometime after the analog to digital switch.
View ArticleClik here to view.
Re: Ethernet connection
No, Menu>Settings & Help>Settings>Network Setup>Restore Defaults then when you try to reconnect it will give you the wireless or wired choice. Restoring defaults won't do any thing to...
View ArticleRe: Out of Home Does Not Work
UDP does not work. GenieGo is attached to Linksys switch which is connected to the Linksys WRT 1900AC. Do you think the switch is the issue? I hate to have to move it around as I have limited ports...
View ArticleWhole Home Dvr
I have an hr24-500 and hr24-700 can u have internet on them while having whole home dvr?
View ArticleRe: Whole Home Dvr
Yes. The easiest and "supported" method is by using a SWM LNB and using an broadband DECA to bridge the Internet to the Directv system.. Another way which is not supported by Directv is connecting...
View ArticleRe: Out of Home Does Not Work
It looks like that is a managed switch. I am not familiar with those. Perhaps you need to forward power there also
View ArticleRe: Whole Home Dvr
so if i hook both to my router i will still be able to watch stuff on my list on both tvs?
View ArticleRe: Whole Home Dvr
Yes, of course you need to have to call DirecTV and have them activate Whole Home DVR, this carries a monthly fee of $3.00 Keep in mind that if you are going the ethernet route, you will need to reset...
View ArticleRe: Whole Home Dvr
Thank u for the info. I have the swm lnb but i do not have the deca. so i will try hooking both up to router.
View ArticleClik here to view.
Re: H20-100 receiver that needs to be reset frequently to get video.
Well, those H20's are pretty old now. This sounds like an HDMI handshake issue. You could use Component Video instead of HDMI (you'll still get HD quality video). Just for grins, when you lose the...
View ArticleRe: Program Remote RC71
press MUTE and ENTER to pair the RC71 in RF mode. then proceed as usual to program the remote using the On Screen Instructions
View Articlegenie problem
Having a problem turning Genie on....have to reset it to get it to operate many times.....Have found it still on when we thought we had turned it off.....
View ArticleRe: Program Remote RC71
I feel stupid! I keep hitting select after making the change to RF instead of the Enter. The small button on the bottom right of the remote
View ArticleRe: genie problem
Run the Built in Self-test (BIST) to try and repair your hard drive. To run the hard drive checks, please follow these steps: * Reboot DVR via red button inside card door.* When you see "Running...
View ArticleRe: H20-100 receiver that needs to be reset frequently to get video.
So there's no way to troubleshoot the HDMI problem? Doesn't seem right that I should have to resort to being deceitful just to get something broken made right. I don't lie very well. I looked into...
View ArticleRe: H20-100 receiver that needs to be reset frequently to get video.
So there's no way to troubleshoot the HDMI problem?Not beyond what you've already tried. Just call and tell them it's dead. You shouldn't have to live with this problem. A replacement will only cost...
View ArticleRe: Does anyone know how to get the directv remote to control a Vizio...
Thank you, I will try this. But does this mean I will have to go through the codes of all manufacturers until I find the right one for Visio? This could take forever.
View Article