Re: H20-100 receiver that needs to be reset frequently to get video.
I think that the $20 shipping would cover both defective receivers confirm this with DTV if you call.
View ArticleClik here to view.
Re: Does anyone know how to get the directv remote to control a Vizio...
You can try emailing Vizio to see if they will give you the code for DTV.
View ArticleRe: New HD receiver with single "satellite in" fitting; dual HD lead
Not Genie... not DVR... just simple HD receiver for second location. One of the cables has markings that goes to Sat1-in on the HD-DVR. Something tells me to use the marked cable for the single post....
View ArticleRe: Change to SWM on HR34-700 receiver
I looked over everything in the house tonight and here is what I have:There are two wires coming out of the wall. One goes directly to the HR34. The second wire goes to a SWM power inserter (to the...
View ArticleRe: Change to SWM on HR34-700 receiver
No need you have a SWM LNB and a SWM splitter somewhere, if there are any other coaxes from the dish you can use them for the OTA if not you will need to run a new one for it.
View ArticleRe: New HD receiver with single "satellite in" fitting; dual HD lead
If it is an H25 then it is SWM only and you need a SWM system to use it.
View ArticleRe: Change to SWM on HR34-700 receiver
I think you are 100% right Shannon, I am betting there is a splitter right where the wires come in the house. If this is correct then couldn't I move the splitter to be right by the receiver and use...
View ArticleRe: New HD receiver with single "satellite in" fitting; dual HD lead
What is the model number of this receiver?? What type of receiver did you order?
View ArticleRe: Change to SWM on HR34-700 receiver
Are the HR34 and power inserter in the same room?
View ArticleRe: Change to SWM on HR34-700 receiver
If that is true then you would need a couple of F-81 barrel connecters and enough slack to connect the one end of the coax from the power inserter to the end of the dish coax and the other for the coax...
View ArticleClik here to view.
Re: Change to SWM on HR34-700 receiver
The splitter may be right outside and if that is the case then there might be only cable going to the LNB
View Articleno access to direct tv channels
why am I seeing 771 directv signal loss with an RID number and Card number? I am not receiving any channels on the t v.
View ArticleRe: no access to direct tv channels
771 usually means the dish is out of alignment call DTV for a $50 service call, free if you have the protection plan or there are videos on you tube if you want to try it yourself. You probably have...
View ArticleRe: no access to direct tv channels
What models Receivers/DVRs do you have?Are all of them doing this?
View ArticleRe: my device is micromax116A need TV application
What does DirecTV have to do with Ren TV?
View Article