Clik here to view.
Re: HR44-700 Receiver resolution lights are flashing.
Update: FYI... I went into settings and observed my selected TV resolutions. Native was selected and so were all types except for the lower 480p resolution. I selected that resolution and after...
View ArticleRe: Wireless Transmitter for a mounted TV
While the C41W is wireless there is still the power plug and the WVB needs to be within 80 ft and connected to the SWM system with coax. I believe you can add the C41W to you online account and DTV...
View ArticleRe: Wireless Transmitter for a mounted TV
All You need to do is call D* and ask for a Wireless client -It's really that easy
View ArticleRe: Receiver install question
I havnt hooked up the additional receiver, still waiting on the access card. The problem is that when I take the current working receiver that os presently hooked up using the direct connect and hook...
View ArticleWon't schedule service because there is snow on the ground
I am absolutely outraged with Directv today. We have a 775 problem (again for the 3rd time in 18 months) and I can't get anyone scheduled to come out because "there is snow on the ground". I tried...
View ArticleRe: Best way to set up multiple televisions
Yeah, I was trying to stay away from the the Balun. I have configured a few Black Box devices where we run 1080 video from one location to multiple displays over a single CAT6, as long as the distance...
View ArticleRe: latest update broke playlist sort?
Read my post. It is a known Genie software issue, introduced with the software that gave us series/episode info. As I said, it will be fixed.
View ArticleRe: Best way to set up multiple televisions
Do you want to watch a different channel on those tvs? Only way is with another receiver with D* if you wish to watch the same channel then a HDMI splitter is the way to go.
View ArticleRe: Won't schedule service because there is snow on the ground
Is your dish covered in snow and blocking the signal?
View ArticleRe: Won't schedule service because there is snow on the ground
Snow on the dish would usually give a 771 error a 775 is usually no power to the LNB and can be a loose or corroded connector, broken coax or a unplugged/bad power inserter.
View ArticleClik here to view.
Re: Won't schedule service because there is snow on the ground
The dish is on a pole about 5 feet off the ground, and is clear. We had the same issue last winter, and it was caused by the coax shrinking and being too short inside where it plugged into the dish....
View ArticleRe: HR44-700 Receiver resolution lights are flashing.
I have mine set to native mode off with only 1080i and 1080p selected and all channels look good. I set this back on 2/26 and have not had the flashing resolution lights since then. Still fingers...
View ArticleRe: I currently have 2 HD receivers and 2 regular receivers...with 2 seperate...
No, you need the second dish for Korean programming....
View ArticleRe: I currently have 2 HD receivers and 2 regular receivers...with 2 seperate...
will the one cable work for both dishes?
View ArticleRe: I currently have 2 HD receivers and 2 regular receivers...with 2 seperate...
Should you also add Cable (internet Service) They will use that One rg6 to feed the modem- SO you will need at least 3 to keep your current service.
View ArticleRe: I currently have 2 HD receivers and 2 regular receivers...with 2 seperate...
Thanks for the help...greatly appreciated.
View ArticleRe: Genie remote sound control for Vizio M602I-B3
You can't use a RC66RX in RF mode with the H44 as it has a different system and only the RC71/72 will work.
View ArticleRe: Genie remote sound control for Vizio M602I-B3
I use one on my HR44 in RF Mode- It will work if you program it using the remote setting in the Menu - It'salso programed in IR to Control my AVR & Blu Ray. You are Mis-informed
View ArticleRe: NDSPCShowServer popups on MAC
I just want to thank you for finding the solution! THANK YOU! RDC
View Article